{"id":274,"date":"2016-04-19T18:27:56","date_gmt":"2016-04-19T18:27:56","guid":{"rendered":"https:\/\/www.moving-it.net\/?p=274"},"modified":"2018-06-21T12:26:54","modified_gmt":"2018-06-21T10:26:54","slug":"recuperar-contrasena-router-cisco","status":"publish","type":"post","link":"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/","title":{"rendered":"\u00bfComo recuperar contrase\u00f1a router Cisco sin perder la configuraci\u00f3n?"},"content":{"rendered":"<p><div class=\"fusion-fullwidth fullwidth-box fusion-builder-row-1 nonhundred-percent-fullwidth non-hundred-percent-height-scrolling\" style=\"--awb-border-radius-top-left:0px;--awb-border-radius-top-right:0px;--awb-border-radius-bottom-right:0px;--awb-border-radius-bottom-left:0px;--awb-flex-wrap:wrap;\" ><div class=\"fusion-builder-row fusion-row\"><div class=\"fusion-layout-column fusion_builder_column fusion-builder-column-0 fusion_builder_column_1_1 1_1 fusion-one-full fusion-column-first fusion-column-last\" style=\"--awb-bg-size:cover;--awb-margin-bottom:0px;\"><div class=\"fusion-column-wrapper fusion-flex-column-wrapper-legacy\"><div class=\"fusion-text fusion-text-1\"><p>Este art\u00edculo es para aquellos IT Managers que s\u00f3n un poco &#8220;despistados&#8221; y no se apuntan bien las contrase\u00f1as (recordad siempre en un lugar seguro y encryptado). \u00bfQui\u00e9n no se ha encontrado con un router que necesitamos resetear o recuperar pero no encontramos la contrase\u00f1a o el password?\u00bfPodemos recuperar el password sin perder la configuraci\u00f3n?<\/p>\n<p>Pues bien si segu\u00eds estos pasos muy sencillos, podr\u00e9is recuperar la contrase\u00f1a o password de vuestro router sin necesidad de resetearlo, con lo que significa que vamos a cambiar el password sin borrar toda la configuraci\u00f3n. GENIAL!!<\/p>\n<blockquote>\n<p style=\"text-align: center;\">TIP: Este m\u00e9todo solo funciona con Router de la Serie 8XX, 2600 y 2800 entre otros.<\/p>\n<\/blockquote>\n<p><img decoding=\"async\" class=\"wp-image-280 size-large aligncenter\" src=\"https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/04\/PASSWORD1-1024x1024.jpg\" alt=\"Recuperaci\u00f3n password router Cisco\" width=\"669\" height=\"669\" srcset=\"https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/04\/PASSWORD1-66x66.jpg 66w, https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/04\/PASSWORD1-150x150.jpg 150w, https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/04\/PASSWORD1-300x300.jpg 300w, https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/04\/PASSWORD1-768x768.jpg 768w, https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/04\/PASSWORD1-1024x1024.jpg 1024w, https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/04\/PASSWORD1.jpg 1667w\" sizes=\"(max-width: 669px) 100vw, 669px\" \/><\/p>\n<h2>Recuperar Password Router Cisco<\/h2>\n<p>Siguiendo estos sencillos pasos vamos a lograr poner un nuevo password o recuperar el viejo que ten\u00edamos sin mucho esfuerzo. Solo hay un requisito, estar fisicamente donde est\u00e1 el router.<\/p>\n<p>Material necesario:<\/p>\n<ul>\n<li>PC<\/li>\n<li>Cable serie (Con adaptador si no disponemos de puerto serie en el PC). Puedes comprar uno de estos si no tienes ninguno:<\/li>\n<\/ul>\n<img decoding=\"async\" src=\"https:\/\/ir-es.amazon-adsystem.com\/e\/ir?t=movit-21&l=alb&o=30&a=B01N1625DE\" width=\"1px\" height=\"1px\" alt=\"\" style=\"position: fixed !important; bottom: -1px !important; right: -1px !important; border:none !important; margin:0px !important;\" \/><img decoding=\"async\" src=\"https:\/\/ir-es.amazon-adsystem.com\/e\/ir?t=movit-21&l=alb&o=30&a=B001S2PYVY\" width=\"1px\" height=\"1px\" alt=\"\" style=\"position: fixed !important; bottom: -1px !important; right: -1px !important; border:none !important; margin:0px !important;\" \/><img decoding=\"async\" src=\"https:\/\/ir-es.amazon-adsystem.com\/e\/ir?t=movit-21&l=alb&o=30&a=B07CTHZB48\" width=\"1px\" height=\"1px\" alt=\"\" style=\"position: fixed !important; bottom: -1px !important; right: -1px !important; border:none !important; margin:0px !important;\" \/><img decoding=\"async\" src=\"https:\/\/ir-es.amazon-adsystem.com\/e\/ir?t=movit-21&l=alb&o=30&a=B01DU7BZTE\" width=\"1px\" height=\"1px\" alt=\"\" style=\"position: fixed !important; bottom: -1px !important; right: -1px !important; border:none !important; margin:0px !important;\" \/><!-- Ad Template with Carousel Layout-->\r\n <!--Section tag for iterating through the list of items-->\r\n<div class=\"aalb-537-product-carousel-unit\" id=\"aalb-B01N1625DE-B001S2PYVY-B07CTHZB48-B01DU7BZTE-ES-movit-21-ProductCarousel_MOV\">\r\n  <p class=\"aalb-537-pc-ad-header\"><\/p>\r\n    <div class=\"aalb-537-pc-wrapper\">\r\n      <div class=\"aalb-537-pc-product-container\">\r\n        <ul class=\"aalb-537-pc-product-list\">\r\n                  <\/ul>\r\n      <\/div>\r\n    <\/div>\r\n    <a href=\"javascript:void(0);\" class=\"aalb-537-pc-btn-prev\">\u2039<\/a>\r\n    <a href=\"javascript:void(0);\" class=\"aalb-537-pc-btn-next\">\u203a<\/a>\r\n  <\/div>\r\n\r\n<script>\r\n  jQuery(document).ready(function() {\r\n\r\n    var CONSTANTS = {\r\n        productMinWidth : 185,\r\n        productMargin   : 20\r\n    };\r\n\r\n    var $adUnits = jQuery('.aalb-537-product-carousel-unit');\r\n    $adUnits.each(function() {\r\n        var $adUnit           = jQuery(this),\r\n            $wrapper          = $adUnit.find('.aalb-537-pc-wrapper'),\r\n            $productContainer = $adUnit.find('.aalb-537-pc-product-container'),\r\n            $btnNext          = $adUnit.find('.aalb-537-pc-btn-next'),\r\n            $btnPrev          = $adUnit.find('.aalb-537-pc-btn-prev'),\r\n            $productList      = $productContainer.find('.aalb-537-pc-product-list'),\r\n            $products         = $productList.find('.aalb-537-pc-product'),\r\n            productCount      = $products.length;\r\n\r\n        if (!productCount) {\r\n            return true;\r\n        }\r\n\r\n        var rows            = $adUnit.find('input[name=rows]').length && parseInt($adUnit.find('input[name=rows]').val(), 10);\r\n        var columns         = $adUnit.find('input[name=columns]').length && parseInt($adUnit.find('input[name=columns]').val(), 10);\r\n\r\n        if( columns ) {\r\n            var productContainerMinWidth = columns * (CONSTANTS.productMinWidth + CONSTANTS.productMargin) + 'px';\r\n            $adUnit.css( 'min-width', productContainerMinWidth );\r\n            $productContainer.css( 'min-width', productContainerMinWidth );\r\n            $products.filter( ':nth-child(' + columns + 'n + 1)' ).css( 'clear', 'both' );\r\n        }\r\n\r\n        if (rows && columns) {\r\n            var cutOffIndex = (rows * columns) - 1;\r\n            $products.filter(':gt(' + cutOffIndex + ')').remove();\r\n        }\r\n\r\n        function updateLayout() {\r\n            var wrapperWidth = $wrapper.width();\r\n            var possibleColumns = columns || parseInt( wrapperWidth \/ (CONSTANTS.productMinWidth + CONSTANTS.productMargin), 10 );\r\n            var actualColumns = columns || possibleColumns < productCount ? possibleColumns : productCount;\r\n\r\n            \/**\r\n             * The actual columns can be zero when the wraperwidth is less than sum of CONSTANTS.productMinWidth and\r\n             * CONSTANTS.productMargin.The parseInt will use floor function and converts any value less than 1 to\r\n             * zero.Therefore making actual columns 1 .\r\n             **\/\r\n            if( actualColumns == 0 ) {\r\n                actualColumns = 1;\r\n            }\r\n\r\n            var productWidth = parseInt( wrapperWidth \/ actualColumns, 10 ) - CONSTANTS.productMargin;\r\n\r\n            $products.css( 'width', productWidth + 'px' );\r\n\r\n            \/**\r\n             * Removing the Carousel navigation button when the number of products selected by admin is less\r\n             * than the actual columns (the number of products) can be shown on screen\r\n             **\/\r\n            if( productCount > actualColumns ) {\r\n                $btnNext.css( 'visibility', 'visible' ).removeClass( 'disabled' ).unbind( 'click' );\r\n                $btnPrev.css( 'visibility', 'visible' ).removeClass( 'disabled' ).unbind( 'click' );\r\n            }\r\n            $productContainer.jCarouselLite( {\r\n                btnNext : '#' + $adUnit.attr( 'id' ) + ' .aalb-537-pc-btn-next',\r\n                btnPrev : '#' + $adUnit.attr( 'id' ) + ' .aalb-537-pc-btn-prev',\r\n                visible : actualColumns,\r\n                circular: false\r\n            } );\r\n\r\n\r\n        }\r\n\r\n        updateLayout();\r\n        jQuery(window).resize(updateLayout);\r\n    });\r\n});\r\n\r\n\/*!\r\n * jCarouselLite - v1.1 - 2014-09-28\r\n * http:\/\/www.gmarwaha.com\/jquery\/jcarousellite\/\r\n * Copyright (c) 2014 Ganeshji Marwaha\r\n * Licensed MIT (https:\/\/github.com\/ganeshmax\/jcarousellite\/blob\/master\/LICENSE)\r\n*\/\r\n\r\n!function(a){a.jCarouselLite={version:\"1.1\"},a.fn.jCarouselLite=function(b){return b=a.extend({},a.fn.jCarouselLite.options,b||{}),this.each(function(){function c(a){return n||(clearTimeout(A),z=a,b.beforeStart&&b.beforeStart.call(this,i()),b.circular?j(a):k(a),m({start:function(){n=!0},done:function(){b.afterEnd&&b.afterEnd.call(this,i()),b.auto&&h(),n=!1}}),b.circular||l()),!1}function d(){if(n=!1,o=b.vertical?\"top\":\"left\",p=b.vertical?\"height\":\"width\",q=B.find(\">ul\"),r=q.find(\">li\"),x=r.size(),w=x<b.visible?x:b.visible,b.circular){var c=r.slice(x-w).clone(),d=r.slice(0,w).clone();q.prepend(c).append(d),b.start+=w}s=a(\"li\",q),y=s.size(),z=b.start}function e(){B.css(\"visibility\",\"visible\"),s.css({overflow:\"hidden\",\"float\":b.vertical?\"none\":\"left\"}),q.css({margin:\"0\",padding:\"0\",position:\"relative\",\"list-style\":\"none\",\"z-index\":\"1\"}),B.css({overflow:\"hidden\",position:\"relative\",\"z-index\":\"2\",left:\"0px\"}),!b.circular&&b.btnPrev&&0==b.start&&a(b.btnPrev).addClass(\"disabled\")}function f(){t=b.vertical?s.outerHeight(!0):s.outerWidth(!0),u=t*y,v=t*w,s.css({width:s.width(),height:s.height()}),q.css(p,u+\"px\").css(o,-(z*t)),B.css(p,v+\"px\")}function g(){b.btnPrev&&a(b.btnPrev).click(function(){return c(z-b.scroll)}),b.btnNext&&a(b.btnNext).click(function(){return c(z+b.scroll)}),b.btnGo&&a.each(b.btnGo,function(d,e){a(e).click(function(){return c(b.circular?w+d:d)})}),b.mouseWheel&&B.mousewheel&&B.mousewheel(function(a,d){return c(d>0?z-b.scroll:z+b.scroll)}),b.auto&&h()}function h(){A=setTimeout(function(){c(z+b.scroll)},b.auto)}function i(){return s.slice(z).slice(0,w)}function j(a){var c;a<=b.start-w-1?(c=a+x+b.scroll,q.css(o,-(c*t)+\"px\"),z=c-b.scroll):a>=y-w+1&&(c=a-x-b.scroll,q.css(o,-(c*t)+\"px\"),z=c+b.scroll)}function k(a){0>a?z=0:a>y-w&&(z=y-w)}function l(){a(b.btnPrev+\",\"+b.btnNext).removeClass(\"disabled\"),a(z-b.scroll<0&&b.btnPrev||z+b.scroll>y-w&&b.btnNext||[]).addClass(\"disabled\")}function m(c){n=!0,q.animate(\"left\"==o?{left:-(z*t)}:{top:-(z*t)},a.extend({duration:b.speed,easing:b.easing},c))}var n,o,p,q,r,s,t,u,v,w,x,y,z,A,B=a(this);d(),e(),f(),g()})},a.fn.jCarouselLite.options={btnPrev:null,btnNext:null,btnGo:null,mouseWheel:!1,auto:null,speed:200,easing:null,vertical:!1,circular:!0,visible:3,start:0,scroll:1,beforeStart:null,afterEnd:null}}(jQuery);\r\n\r\n\r\n<\/script>\r\n\n<h3>Procedimiento paso a paso<\/h3>\n<ol>\n<li>Conectar el PC con el puerto de &#8220;console&#8221; del router. Utilitzar estos datos:\n<ul>\n<li style=\"list-style-type: none;\">\n<ul>\n<li>9600 baud rate<\/li>\n<li>No parity<\/li>\n<li>8 data bits<\/li>\n<li>1 stop bit<\/li>\n<li>No flow control<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<blockquote>\n<p>TIP: Consulta el art\u00edculo <a href=\"https:\/\/www.moving-it.net\/conectar-pc-switch-cisco-cable-console\/\">Conectar PC a router Cisco<\/a> para saber como hacerlo<\/p>\n<\/blockquote>\n<\/li>\n<li>Prepara la conexi\u00f3n por el puerto serie con el Putty o Hyperterminal.<\/li>\n<li>Reinicia el router utilizando el interruptor.<\/li>\n<li>Pulsa <strong>BREAK <\/strong>en el terminal de consola.<\/li>\n<li>Cuando aparezca en pantalla rommon&gt;1 introduce <strong>confreg 0x2142<\/strong> para reinciar desde la flash. (Este paso se salta la configuraci\u00f3n de inicio (start-up configuration) donde estan guardados los passwords).<\/li>\n<li>Introducir el comando <strong>RESET <\/strong>cuando aparezca rommon2 &gt; en la pantalla.<\/li>\n<li>El router se reiniciar\u00e1, pero ignorar\u00e0 la configuraci\u00f3n guardada.<\/li>\n<li>Escribe <strong>NO <\/strong>despues de cada pregunta que os salga, o pulsa<strong> Ctrl-C <\/strong>para omitir la configuraci\u00f3n inicial del router.<\/li>\n<li>Introduce el comando <strong>enable<\/strong> cuando aparezca en pantalla <em>Router&gt;. <\/em>Entrar\u00e1s en el modo enable y ver\u00e1s al inicio de pantalla<em> Router#.<\/em><\/li>\n<li>Escribe <strong>configure memory<\/strong> o <strong>copy startup-config running-config<\/strong> para copiar la confguraci\u00f3n guardada a la configuraci\u00f3n que est\u00e1 ejecut\u00e1ndose. IMPORTANTE: No introducir los comandos <strong>copy running-config startup-config<\/strong> o <strong>write<\/strong>. Estos sobrescribiria la configuraci\u00f3n que ten\u00edamos en el router.<\/li>\n<li>Pon los siguientes comandos <strong>configure terminal<\/strong>. Entonces nos aparecer\u00e1 en el router <em>hostname(config)#<\/em><\/li>\n<li>Escribe <strong>enable secret<\/strong> seguido del password. Ejemplo: <strong>enable secret <em>cisco.<\/em><\/strong> Esto pondr\u00e1 cisco como nuestro nuevo password.<\/li>\n<li>Introduce el comando <strong>config-register 0x2102<\/strong> para volver a dejar el router con la opci\u00f3n de arranque por defecto.<\/li>\n<li>Pulsa<strong> Ctrl-z<\/strong> o <strong>end<\/strong> para salir del modo de configuraci\u00f3n.<\/li>\n<li>Introduce los comandos <strong>write memory <\/strong>o <strong>copy running-config startup-config <\/strong>para guardar la configuraci\u00f3n y confirmar los cambios.<\/li>\n<\/ol>\n<h3>Ejemplo de recuperaci\u00f3n password router Cisco:<\/h3>\n<p>A continuaci\u00f3n os muestro un ejemplo de recueraci\u00f3n de contrase\u00f1a router Cisco dentro del mismo router.<\/p>\n<table style=\"background-color: #f2eded;\">\n<tbody>\n<tr>\n<td style=\"width: 888.8px;\">\n<pre>Router&gt;<b>enable<\/b>\r\nPassword:\r\nPassword:\r\nPassword:\r\n% Bad secrets<\/pre>\n<p>Router&gt;<b>show version<\/b><br \/>\nCisco Internetwork Operating System Software<br \/>\nIOS &#8482; C2600 Software (C2600-IS-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)<br \/>\nCopyright (c) 1986-1999 by cisco Systems, Inc.<br \/>\nCompiled Tue 07-Dec-99 02:21 by phanguye<br \/>\nImage text-base: 0x80008088, data-base: 0x80C524F8<\/p>\n<p>ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)<\/p>\n<p>Router uptime is 3 minutes<br \/>\nSystem returned to ROM by abort at PC 0x802D0B60<br \/>\nSystem image file is &#8220;flash:c2600-is-mz.120-7.T&#8221;<\/p>\n<p>cisco 2611 (MPC860) processor (revision 0x202) with 26624K\/6144K bytes of memory.<br \/>\nProcessor board ID JAB031202NK (3878188963)<br \/>\nM860 processor: part number 0, mask 49<br \/>\nBridging software.<br \/>\nX.25 software, Version 3.0.0.<br \/>\nBasic Rate ISDN software, Version 1.1.<br \/>\n2 Ethernet\/IEEE 802.3 interface(s)<br \/>\n2 Serial(sync\/async) network interface(s)<br \/>\n1 ISDN Basic Rate interface(s)<br \/>\n32K bytes of non-volatile configuration memory.<br \/>\n8192K bytes of processor board System flash partition 1 (Read\/Write)<br \/>\n8192K bytes of processor board System flash partition 2 (Read\/Write)<\/p>\n<p><b>Configuration register is 0x2102<\/b><\/p>\n<p>Router&gt;<\/p>\n<p><i><br \/>\n<span style=\"color: #0000ff;\">!&#8212; El router se acaba de reiniciar con el interruptor de power-off y power-on.<\/span><br \/>\n<\/i><\/p>\n<p>!<\/p>\n<p>*** System received an abort due to Break Key ***<\/p>\n<p>signal= 0x3, code= 0x500, context= 0x813ac158<br \/>\nPC = 0x802d0b60, Vector = 0x500, SP = 0x80006030<br \/>\nrommon 1 &gt; <b>confreg 0x2142<\/b><\/p>\n<p>You must reset or power cycle for new config to take effect<\/p>\n<p>rommon 2 &gt; <b>reset<\/b><\/p>\n<p>System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)<br \/>\nCopyright (c) 1999 by cisco Systems, Inc.<br \/>\nTAC:Home:SW:IOS:Specials for info<br \/>\nC2600 platform with 32768 Kbytes of main memory<\/p>\n<p>program load complete, entry point: 0x80008000, size: 0x6fdb4c<\/p>\n<p>Self decompressing the image : ###############################<br \/>\n##############################################################<br \/>\n##############################################################<br \/>\n##############################################################<br \/>\n###############################<\/p>\n<pre><\/pre>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div><div class=\"fusion-clearfix\"><\/div><\/div><\/div><\/div><\/div><div class=\"fusion-fullwidth fullwidth-box fusion-builder-row-2 hundred-percent-fullwidth non-hundred-percent-height-scrolling\" style=\"--awb-border-radius-top-left:0px;--awb-border-radius-top-right:0px;--awb-border-radius-bottom-right:0px;--awb-border-radius-bottom-left:0px;--awb-overflow:visible;--awb-flex-wrap:wrap;\" ><div class=\"fusion-builder-row fusion-row\"><div class=\"fusion-layout-column fusion_builder_column fusion-builder-column-1 fusion_builder_column_1_1 1_1 fusion-one-full fusion-column-first fusion-column-last fusion-column-no-min-height\" style=\"--awb-bg-size:cover;--awb-margin-bottom:0px;\"><div class=\"fusion-column-wrapper fusion-flex-column-wrapper-legacy\"><div class=\"fusion-text fusion-text-2\"><p>[OK]<\/p>\n<p>Restricted Rights Legend<\/p>\n<p>Use, duplication, or disclosure by the Government is<br \/>\nsubject to restrictions as set forth in subparagraph<br \/>\n(c) of the Commercial Computer Software &#8211; Restricted<br \/>\nRights clause at FAR sec. 52.227-19 and subparagraph<br \/>\n(c) (1) (ii) of the Rights in Technical Data and Computer<br \/>\nSoftware clause at DFARS sec. 252.227-7013.<\/p>\n<p>cisco Systems, Inc.<br \/>\n170 West Tasman Drive<br \/>\nSan Jose, California 95134-1706<\/p>\n<p>Cisco Internetwork Operating System Software<br \/>\nIOS &#8482; C2600 Software (C2600-IS-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)<br \/>\nCopyright (c) 1986-1999 by cisco Systems, Inc.<br \/>\nCompiled Tue 07-Dec-99 02:21 by phanguye<br \/>\nImage text-base: 0x80008088, data-base: 0x80C524F8<\/p>\n<p>cisco 2611 (MPC860) processor (revision 0x202) with 26624K\/6144K bytes of memory.<br \/>\nProcessor board ID JAB031202NK (3878188963)<br \/>\nM860 processor: part number 0, mask 49<br \/>\nBridging software.<br \/>\nX.25 software, Version 3.0.0.<br \/>\nBasic Rate ISDN software, Version 1.1.<br \/>\n2 Ethernet\/IEEE 802.3 interface(s)<br \/>\n2 Serial(sync\/async) network interface(s)<br \/>\n1 ISDN Basic Rate interface(s)<br \/>\n32K bytes of non-volatile configuration memory.<br \/>\n8192K bytes of processor board System flash partition 1 (Read\/Write)<br \/>\n8192K bytes of processor board System flash partition 2 (Read\/Write)<\/p>\n<p>&#8212; System Configuration Dialog &#8212;<\/p>\n<p>Would you like to enter the initial configuration dialog? [yes\/no]: <b>n<\/b><\/p>\n<p>Press RETURN to get started!<\/p>\n<p>00:00:19: %LINK-3-UPDOWN: Interface BRI0\/0, changed state to up<br \/>\n00:00:19: %LINK-3-UPDOWN: Interface Ethernet0\/0, changed state to up<br \/>\n00:00:19: %LINK-3-UPDOWN: Interface Ethernet0\/1, changed state to up<br \/>\n00:00:19: %LINK-3-UPDOWN: Interface Serial0\/0, changed state to down<br \/>\n00:00:19: %LINK-3-UPDOWN: Interface Serial0\/1, changed state to down<br \/>\n00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0\/0,<br \/>\nchanged state to down<br \/>\n00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0\/0,<br \/>\nchanged state to up<br \/>\nRouter&gt;<br \/>\n00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0\/1,<br \/>\nchanged state to up<br \/>\n00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0\/0,<br \/>\nchanged state to down<br \/>\n00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0\/1,<br \/>\nchanged state to down<br \/>\n00:00:50: %SYS-5-RESTART: System restarted &#8212;<br \/>\nCisco Internetwork Operating System Software<br \/>\nIOS &#8482; C2600 Software (C2600-IS-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)<br \/>\nCopyright (c) 1986-1999 by cisco Systems, Inc.<br \/>\nCompiled Tue 07-Dec-99 02:21 by phanguye<br \/>\n00:00:50: %LINK-5-CHANGED: Interface BRI0\/0,<br \/>\nchanged state to administratively down<br \/>\n00:00:52: %LINK-5-CHANGED: Interface Ethernet0\/0,<br \/>\nchanged state to administratively down<br \/>\n00:00:52: %LINK-5-CHANGED: Interface Serial0\/0,<br \/>\nchanged state to administratively down<br \/>\n00:00:52: %LINK-5-CHANGED: Interface Ethernet0\/1,<br \/>\nchanged state to administratively down<br \/>\n00:00:52: %LINK-5-CHANGED: Interface Serial0\/1,<br \/>\nchanged state to administratively down<br \/>\n00:00:53: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0\/0,<br \/>\nchanged state to down<br \/>\n00:00:53: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0\/1,<br \/>\nchanged state to down<br \/>\nRouter&gt;<br \/>\nRouter&gt;<b>enable<\/b><br \/>\nRouter#<b>copy startup-config running-config<\/b><br \/>\nDestination filename [running-config]?<br \/>\n1324 bytes copied in 2.35 secs (662 bytes\/sec)<br \/>\nRouter#<br \/>\n00:01:24: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0\/0:1,<br \/>\nchanged state to down<br \/>\n00:01:24: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0\/0:2,<br \/>\nchanged state to down<br \/>\nRouter#<b>configure terminal<\/b><br \/>\nEnter configuration commands, one per line. End with CNTL\/Z.<br \/>\nRouter(config)#<b>enable secret &lt; password &gt;<\/b><br \/>\nRouter(config)#<b>^Z<\/b><br \/>\n00:01:54: %SYS-5-CONFIG_I: Configured from console by console<br \/>\nRouter#<b>show ip interface brief<\/b><\/p>\n<p>Interface IP-Address OK? Method Status Protocol<br \/>\nEthernet0\/0 10.200.40.37 YES TFTP <b>administratively down<\/b> down<br \/>\nSerial0\/0 unassigned YES TFTP <b>administratively down<\/b> down<br \/>\nBRI0\/0 193.251.121.157 YES unset <b>administratively down<\/b> down<br \/>\nBRI0\/0:1 unassigned YES unset <b>administratively down<\/b> down<br \/>\nBRI0\/0:2 unassigned YES unset <b>administratively down<\/b> down<br \/>\nEthernet0\/1 unassigned YES TFTP <b>administratively down<\/b> down<br \/>\nSerial0\/1 unassigned YES TFTP <b>administratively down<\/b> down<br \/>\nLoopback0 193.251.121.157 YES TFTP up up<br \/>\nRouter#<b>configure terminal<\/b><br \/>\nEnter configuration commands, one per line. End with CNTL\/Z.<br \/>\nRouter(config)#<b>interface Ethernet0\/0<\/b><br \/>\nRouter(config-if)#<b>no shutdown<\/b><br \/>\nRouter(config-if)#<br \/>\n00:02:14: %LINK-3-UPDOWN: Interface Ethernet0\/0, changed state to up<br \/>\n00:02:15: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0\/0,<br \/>\nchanged state to up<br \/>\nRouter(config-if)#<b>interface BRI0\/0<\/b><br \/>\nRouter(config-if)#<b>no shutdown<\/b><br \/>\nRouter(config-if)#<br \/>\n00:02:26: %LINK-3-UPDOWN: Interface BRI0\/0:1, changed state to down<br \/>\n00:02:26: %LINK-3-UPDOWN: Interface BRI0\/0:2, changed state to down<br \/>\n00:02:26: %LINK-3-UPDOWN: Interface BRI0\/0, changed state to up<br \/>\n00:02:115964116991: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0\/0,<br \/>\nTEI 68 changed to up<br \/>\nRouter(config-if)#<b>^Z<\/b><br \/>\nRouter#<br \/>\n00:02:35: %SYS-5-CONFIG_I: Configured from console by console<br \/>\nRouter#<b>copy running-config startup-config<\/b><br \/>\nDestination filename [startup-config]?<br \/>\nBuilding configuration&#8230;[OK]\nRouter#<b>show version<\/b><br \/>\nCisco Internetwork Operating System Software<br \/>\nIOS &#8482; C2600 Software (C2600-IS-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)<br \/>\nCopyright (c) 1986-1999 by cisco Systems, Inc.<br \/>\nCompiled Tue 07-Dec-99 02:21 by phanguye<br \/>\nImage text-base: 0x80008088, data-base: 0x80C524F8<\/p>\n<p>ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)<\/p>\n<p>Router uptime is 3 minutes<br \/>\nSystem returned to ROM by abort at PC 0x802D0B60<br \/>\nSystem image file is &#8220;flash:c2600-is-mz.120-7.T&#8221;<\/p>\n<p>cisco 2611 (MPC860) processor (revision 0x202)<br \/>\nwith 26624K\/6144K bytes of memory.<br \/>\nProcessor board ID JAB031202NK (3878188963)<br \/>\nM860 processor: part number 0, mask 49<br \/>\nBridging software.<br \/>\nX.25 software, Version 3.0.0.<br \/>\nBasic Rate ISDN software, Version 1.1.<br \/>\n2 Ethernet\/IEEE 802.3 interface(s)<br \/>\n2 Serial(sync\/async) network interface(s)<br \/>\n1 ISDN Basic Rate interface(s)<br \/>\n32K bytes of non-volatile configuration memory.<br \/>\n8192K bytes of processor board System flash partition 1 (Read\/Write)<br \/>\n8192K bytes of processor board System flash partition 2 (Read\/Write)<\/p>\n<p>Configuration register is 0x2142<\/p>\n<p>Router#<b>configure terminal<\/b><br \/>\nEnter configuration commands, one per line. End with CNTL\/Z.<br \/>\nRouter(config)#<b>config-register 0x2102<\/b><br \/>\nRouter(config)#^Z<br \/>\n00:03:20: %SYS-5-CONFIG_I: Configured from console by console<\/p>\n<p>Router#<b>show version<\/b><br \/>\nCisco Internetwork Operating System Software<br \/>\nIOS &#8482; C2600 Software (C2600-IS-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)<br \/>\nCopyright (c) 1986-1999 by cisco Systems, Inc.<br \/>\nCompiled Tue 07-Dec-99 02:21 by phanguye<br \/>\nImage text-base: 0x80008088, data-base: 0x80C524F8<\/p>\n<p>ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)<\/p>\n<p>Router uptime is 3 minutes<br \/>\nSystem returned to ROM by abort at PC 0x802D0B60<br \/>\nSystem image file is &#8220;flash:c2600-is-mz.120-7.T&#8221;<\/p>\n<p>cisco 2611 (MPC860) processor (revision 0x202)<br \/>\nwith 26624K\/6144K bytes of memory.<br \/>\nProcessor board ID JAB031202NK (3878188963)<br \/>\nM860 processor: part number 0, mask 49<br \/>\nBridging software.<br \/>\nX.25 software, Version 3.0.0.<br \/>\nBasic Rate ISDN software, Version 1.1.<\/p>\n<p>2 Ethernet\/IEEE 802.3 interface(s)<br \/>\n2 Serial(sync\/async) network interface(s)<br \/>\n1 ISDN Basic Rate interface(s)<br \/>\n32K bytes of non-volatile configuration memory.<br \/>\n8192K bytes of processor board System flash partition 1 (Read\/Write)<br \/>\n8192K bytes of processor board System flash partition 2 (Read\/Write)<\/p>\n<p>Configuration register is 0x2142 (will be <b>0x2102<\/b> at next reload)<\/p>\n<p>Router#<\/p>\n<\/div><div class=\"fusion-clearfix\"><\/div><\/div><\/div><\/div><\/div><\/p>\n","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":280,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"rating_form_position":"","rating_results_position":"","mr_structured_data_type":"","footnotes":""},"categories":[21,19,22],"tags":[],"class_list":["post-274","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-redes-cisco","category-gestion-de-redes","category-seguridad-redes"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v23.9 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>\u00bfComo recuperar password router Cisco sin borrar configuraci\u00f3n?<\/title>\n<meta name=\"description\" content=\"\u00bfHas perdido la contrase\u00f1a de tu router?\u00bfNo sabes quien tiene el password? Con este art\u00edculo podr\u00e1s recuperar o restablecer el password de tu router.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/\" \/>\n<meta property=\"og:locale\" content=\"ca_ES\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"\u00bfComo recuperar password router Cisco sin borrar configuraci\u00f3n?\" \/>\n<meta property=\"og:description\" content=\"\u00bfHas perdido la contrase\u00f1a de tu router?\u00bfNo sabes quien tiene el password? Con este art\u00edculo podr\u00e1s recuperar o restablecer el password de tu router.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/\" \/>\n<meta property=\"og:site_name\" content=\"Moving-IT\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/movingit.net\/\" \/>\n<meta property=\"article:published_time\" content=\"2016-04-19T18:27:56+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2018-06-21T10:26:54+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/04\/PASSWORD1.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1667\" \/>\n\t<meta property=\"og:image:height\" content=\"1667\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"movingitadm\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@movingitnet\" \/>\n<meta name=\"twitter:site\" content=\"@movingitnet\" \/>\n<meta name=\"twitter:label1\" content=\"Escrit per\" \/>\n\t<meta name=\"twitter:data1\" content=\"movingitadm\" \/>\n\t<meta name=\"twitter:label2\" content=\"Temps estimat de lectura\" \/>\n\t<meta name=\"twitter:data2\" content=\"10 minuts\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/\"},\"author\":{\"name\":\"movingitadm\",\"@id\":\"https:\/\/www.moving-it.net\/ca\/#\/schema\/person\/3839560932bba6035804db55523327fd\"},\"headline\":\"\u00bfComo recuperar contrase\u00f1a router Cisco sin perder la configuraci\u00f3n?\",\"datePublished\":\"2016-04-19T18:27:56+00:00\",\"dateModified\":\"2018-06-21T10:26:54+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/\"},\"wordCount\":2006,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/www.moving-it.net\/ca\/#organization\"},\"image\":{\"@id\":\"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/04\/PASSWORD1.jpg\",\"articleSection\":[\"Cisco\",\"Networking\",\"Seguridad\"],\"inLanguage\":\"ca\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/\",\"url\":\"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/\",\"name\":\"\u00bfComo recuperar password router Cisco sin borrar configuraci\u00f3n?\",\"isPartOf\":{\"@id\":\"https:\/\/www.moving-it.net\/ca\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/04\/PASSWORD1.jpg\",\"datePublished\":\"2016-04-19T18:27:56+00:00\",\"dateModified\":\"2018-06-21T10:26:54+00:00\",\"description\":\"\u00bfHas perdido la contrase\u00f1a de tu router?\u00bfNo sabes quien tiene el password? Con este art\u00edculo podr\u00e1s recuperar o restablecer el password de tu router.\",\"breadcrumb\":{\"@id\":\"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/#breadcrumb\"},\"inLanguage\":\"ca\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"ca\",\"@id\":\"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/#primaryimage\",\"url\":\"https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/04\/PASSWORD1.jpg\",\"contentUrl\":\"https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/04\/PASSWORD1.jpg\",\"width\":1667,\"height\":1667,\"caption\":\"Designed by freepik\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Inici\",\"item\":\"https:\/\/www.moving-it.net\/ca\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"\u00bfComo recuperar contrase\u00f1a router Cisco sin perder la configuraci\u00f3n?\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.moving-it.net\/ca\/#website\",\"url\":\"https:\/\/www.moving-it.net\/ca\/\",\"name\":\"Moving-IT\",\"description\":\"Consultoria IT y Gesti\u00f3n ERP\/CRM\",\"publisher\":{\"@id\":\"https:\/\/www.moving-it.net\/ca\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.moving-it.net\/ca\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"ca\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/www.moving-it.net\/ca\/#organization\",\"name\":\"Moving-IT\",\"url\":\"https:\/\/www.moving-it.net\/ca\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ca\",\"@id\":\"https:\/\/www.moving-it.net\/ca\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/03\/moving-it-new-1.png\",\"contentUrl\":\"https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/03\/moving-it-new-1.png\",\"width\":300,\"height\":60,\"caption\":\"Moving-IT\"},\"image\":{\"@id\":\"https:\/\/www.moving-it.net\/ca\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.facebook.com\/movingit.net\/\",\"https:\/\/x.com\/movingitnet\"]},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.moving-it.net\/ca\/#\/schema\/person\/3839560932bba6035804db55523327fd\",\"name\":\"movingitadm\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ca\",\"@id\":\"https:\/\/www.moving-it.net\/ca\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/7ed72a19e1e597cc5a168acdef5341e2?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/7ed72a19e1e597cc5a168acdef5341e2?s=96&d=mm&r=g\",\"caption\":\"movingitadm\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"\u00bfComo recuperar password router Cisco sin borrar configuraci\u00f3n?","description":"\u00bfHas perdido la contrase\u00f1a de tu router?\u00bfNo sabes quien tiene el password? Con este art\u00edculo podr\u00e1s recuperar o restablecer el password de tu router.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/","og_locale":"ca_ES","og_type":"article","og_title":"\u00bfComo recuperar password router Cisco sin borrar configuraci\u00f3n?","og_description":"\u00bfHas perdido la contrase\u00f1a de tu router?\u00bfNo sabes quien tiene el password? Con este art\u00edculo podr\u00e1s recuperar o restablecer el password de tu router.","og_url":"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/","og_site_name":"Moving-IT","article_publisher":"https:\/\/www.facebook.com\/movingit.net\/","article_published_time":"2016-04-19T18:27:56+00:00","article_modified_time":"2018-06-21T10:26:54+00:00","og_image":[{"width":1667,"height":1667,"url":"https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/04\/PASSWORD1.jpg","type":"image\/jpeg"}],"author":"movingitadm","twitter_card":"summary_large_image","twitter_creator":"@movingitnet","twitter_site":"@movingitnet","twitter_misc":{"Escrit per":"movingitadm","Temps estimat de lectura":"10 minuts"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/#article","isPartOf":{"@id":"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/"},"author":{"name":"movingitadm","@id":"https:\/\/www.moving-it.net\/ca\/#\/schema\/person\/3839560932bba6035804db55523327fd"},"headline":"\u00bfComo recuperar contrase\u00f1a router Cisco sin perder la configuraci\u00f3n?","datePublished":"2016-04-19T18:27:56+00:00","dateModified":"2018-06-21T10:26:54+00:00","mainEntityOfPage":{"@id":"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/"},"wordCount":2006,"commentCount":0,"publisher":{"@id":"https:\/\/www.moving-it.net\/ca\/#organization"},"image":{"@id":"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/#primaryimage"},"thumbnailUrl":"https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/04\/PASSWORD1.jpg","articleSection":["Cisco","Networking","Seguridad"],"inLanguage":"ca","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/","url":"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/","name":"\u00bfComo recuperar password router Cisco sin borrar configuraci\u00f3n?","isPartOf":{"@id":"https:\/\/www.moving-it.net\/ca\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/#primaryimage"},"image":{"@id":"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/#primaryimage"},"thumbnailUrl":"https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/04\/PASSWORD1.jpg","datePublished":"2016-04-19T18:27:56+00:00","dateModified":"2018-06-21T10:26:54+00:00","description":"\u00bfHas perdido la contrase\u00f1a de tu router?\u00bfNo sabes quien tiene el password? Con este art\u00edculo podr\u00e1s recuperar o restablecer el password de tu router.","breadcrumb":{"@id":"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/#breadcrumb"},"inLanguage":"ca","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/"]}]},{"@type":"ImageObject","inLanguage":"ca","@id":"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/#primaryimage","url":"https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/04\/PASSWORD1.jpg","contentUrl":"https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/04\/PASSWORD1.jpg","width":1667,"height":1667,"caption":"Designed by freepik"},{"@type":"BreadcrumbList","@id":"https:\/\/www.moving-it.net\/ca\/recuperar-contrasena-router-cisco\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Inici","item":"https:\/\/www.moving-it.net\/ca\/"},{"@type":"ListItem","position":2,"name":"\u00bfComo recuperar contrase\u00f1a router Cisco sin perder la configuraci\u00f3n?"}]},{"@type":"WebSite","@id":"https:\/\/www.moving-it.net\/ca\/#website","url":"https:\/\/www.moving-it.net\/ca\/","name":"Moving-IT","description":"Consultoria IT y Gesti\u00f3n ERP\/CRM","publisher":{"@id":"https:\/\/www.moving-it.net\/ca\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.moving-it.net\/ca\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"ca"},{"@type":"Organization","@id":"https:\/\/www.moving-it.net\/ca\/#organization","name":"Moving-IT","url":"https:\/\/www.moving-it.net\/ca\/","logo":{"@type":"ImageObject","inLanguage":"ca","@id":"https:\/\/www.moving-it.net\/ca\/#\/schema\/logo\/image\/","url":"https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/03\/moving-it-new-1.png","contentUrl":"https:\/\/www.moving-it.net\/wp-content\/uploads\/2016\/03\/moving-it-new-1.png","width":300,"height":60,"caption":"Moving-IT"},"image":{"@id":"https:\/\/www.moving-it.net\/ca\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/movingit.net\/","https:\/\/x.com\/movingitnet"]},{"@type":"Person","@id":"https:\/\/www.moving-it.net\/ca\/#\/schema\/person\/3839560932bba6035804db55523327fd","name":"movingitadm","image":{"@type":"ImageObject","inLanguage":"ca","@id":"https:\/\/www.moving-it.net\/ca\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/7ed72a19e1e597cc5a168acdef5341e2?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/7ed72a19e1e597cc5a168acdef5341e2?s=96&d=mm&r=g","caption":"movingitadm"}}]}},"multi-rating":{"mr_rating_results":[{"adjusted_star_result":5,"star_result":5,"total_max_option_value":5,"adjusted_score_result":5,"score_result":5,"percentage_result":100,"adjusted_percentage_result":100,"count":2,"post_id":274}]},"_links":{"self":[{"href":"https:\/\/www.moving-it.net\/ca\/wp-json\/wp\/v2\/posts\/274","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.moving-it.net\/ca\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.moving-it.net\/ca\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.moving-it.net\/ca\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.moving-it.net\/ca\/wp-json\/wp\/v2\/comments?post=274"}],"version-history":[{"count":20,"href":"https:\/\/www.moving-it.net\/ca\/wp-json\/wp\/v2\/posts\/274\/revisions"}],"predecessor-version":[{"id":909,"href":"https:\/\/www.moving-it.net\/ca\/wp-json\/wp\/v2\/posts\/274\/revisions\/909"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.moving-it.net\/ca\/wp-json\/wp\/v2\/media\/280"}],"wp:attachment":[{"href":"https:\/\/www.moving-it.net\/ca\/wp-json\/wp\/v2\/media?parent=274"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.moving-it.net\/ca\/wp-json\/wp\/v2\/categories?post=274"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.moving-it.net\/ca\/wp-json\/wp\/v2\/tags?post=274"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}